TireSizeCheck

225/70R16 vs 225/65R17

Fit verdict

Good fit

Diameter change

+0.4%

Within the 3% rule — overall diameter changes only 0.4%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read lower than your true speed.

New overall diameter

28.52″

was 28.40″

True speed at an indicated 60

60.2 mph

speedometer reads low

Revolutions per mile

707

was 710 · −3

Switching from 225/70R16 to 225/65R17? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.

Measurement 225/70R16 225/65R17 Change
Overall diameter 28.40″ 28.52″ +0.11″ (+0.4%)
Sidewall height 6.20″ (157.5 mm) 5.76″ (146.3 mm) −11.3 mm
Tread width 225 mm 225 mm +0 mm
Circumference 89.23″ 89.58″ +0.36″
Revs per mile 710 707 −3
Speedometer error baseline +0.4% reads low

Diameter overlay

225/70R16 225/65R17

Speedometer check

With 225/65R17 fitted, when the speedometer shows the indicated speed, your actual speed is:

25 mph shown

25.1 mph actual

35 mph shown

35.1 mph actual

45 mph shown

45.2 mph actual

55 mph shown

55.2 mph actual

65 mph shown

65.3 mph actual

75 mph shown

75.3 mph actual

Common questions

Will 225/65R17 fit instead of 225/70R16?
Good fit. Within the 3% rule — overall diameter changes only 0.4%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read lower than your true speed. Overall diameter goes from 28.40″ to 28.52″, a change of +0.4%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
How far off will my speedometer read on 225/65R17?
At an indicated 60 mph you would actually be travelling about 60.2 mph — a +0.4% error. The speedometer reads low, so you are going faster than it shows.
What is the difference in revolutions per mile between 225/70R16 and 225/65R17?
225/70R16 turns roughly 710 revolutions per mile; 225/65R17 turns roughly 707. That is a change of −3 revolutions per mile, which is what shifts odometer and speedometer readings.