255/40R19 vs 245/35R19
New overall diameter
25.75″
was 27.03″
True speed at an indicated 60
57.2 mph
speedometer reads high
Revolutions per mile
783
was 746 · +37
Switching from 255/40R19 to 245/35R19? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 255/40R19 | 245/35R19 | Change |
|---|---|---|---|
| Overall diameter | 27.03″ | 25.75″ | −1.28″ (−4.7%) |
| Sidewall height | 4.02″ (102.0 mm) | 3.38″ (85.8 mm) | −16.3 mm |
| Tread width | 255 mm | 245 mm | −10 mm |
| Circumference | 84.92″ | 80.90″ | −4.02″ |
| Revs per mile | 746 | 783 | +37 |
| Speedometer error | baseline | −4.7% | reads high |
Diameter overlay
255/40R19 245/35R19
Speedometer check
With 245/35R19 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
23.8 mph actual
35 mph shown
33.3 mph actual
45 mph shown
42.9 mph actual
55 mph shown
52.4 mph actual
65 mph shown
61.9 mph actual
75 mph shown
71.4 mph actual
Common questions
- Will 245/35R19 fit instead of 255/40R19?
- Marginal fit — proceed with care. The 4.7% diameter change is between 3% and 5%. It can work, but expect noticeable speedometer error and check wheel-well clearance, scrub radius and gearing before committing. Your speedometer will read higher than your true speed. Overall diameter goes from 27.03″ to 25.75″, a change of −4.7%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 245/35R19?
- At an indicated 60 mph you would actually be travelling about 57.2 mph — a −4.7% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 255/40R19 and 245/35R19?
- 255/40R19 turns roughly 746 revolutions per mile; 245/35R19 turns roughly 783. That is a change of +37 revolutions per mile, which is what shifts odometer and speedometer readings.