TireSizeCheck

275/55R20 vs 285/55R20

Fit verdict

Good fit

Diameter change

+1.4%

Within the 3% rule — overall diameter changes only 1.4%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read lower than your true speed.

New overall diameter

32.34″

was 31.91″

True speed at an indicated 60

60.8 mph

speedometer reads low

Revolutions per mile

624

was 632 · −8

Switching from 275/55R20 to 285/55R20? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.

Measurement 275/55R20 285/55R20 Change
Overall diameter 31.91″ 32.34″ +0.43″ (+1.4%)
Sidewall height 5.95″ (151.3 mm) 6.17″ (156.8 mm) +5.5 mm
Tread width 275 mm 285 mm +10 mm
Circumference 100.25″ 101.61″ +1.36″
Revs per mile 632 624 −8
Speedometer error baseline +1.4% reads low

Diameter overlay

275/55R20 285/55R20

Speedometer check

With 285/55R20 fitted, when the speedometer shows the indicated speed, your actual speed is:

25 mph shown

25.3 mph actual

35 mph shown

35.5 mph actual

45 mph shown

45.6 mph actual

55 mph shown

55.7 mph actual

65 mph shown

65.9 mph actual

75 mph shown

76.0 mph actual

Common questions

Will 285/55R20 fit instead of 275/55R20?
Good fit. Within the 3% rule — overall diameter changes only 1.4%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read lower than your true speed. Overall diameter goes from 31.91″ to 32.34″, a change of +1.4%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
How far off will my speedometer read on 285/55R20?
At an indicated 60 mph you would actually be travelling about 60.8 mph — a +1.4% error. The speedometer reads low, so you are going faster than it shows.
What is the difference in revolutions per mile between 275/55R20 and 285/55R20?
275/55R20 turns roughly 632 revolutions per mile; 285/55R20 turns roughly 624. That is a change of −8 revolutions per mile, which is what shifts odometer and speedometer readings.