285/65R20 vs 275/65R20
New overall diameter
34.07″
was 34.59″
True speed at an indicated 60
59.1 mph
speedometer reads high
Revolutions per mile
592
was 583 · +9
Switching from 285/65R20 to 275/65R20? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 285/65R20 | 275/65R20 | Change |
|---|---|---|---|
| Overall diameter | 34.59″ | 34.07″ | −0.51″ (−1.5%) |
| Sidewall height | 7.29″ (185.3 mm) | 7.04″ (178.8 mm) | −6.5 mm |
| Tread width | 285 mm | 275 mm | −10 mm |
| Circumference | 108.66″ | 107.05″ | −1.61″ |
| Revs per mile | 583 | 592 | +9 |
| Speedometer error | baseline | −1.5% | reads high |
Diameter overlay
285/65R20 275/65R20
Speedometer check
With 275/65R20 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
24.6 mph actual
35 mph shown
34.5 mph actual
45 mph shown
44.3 mph actual
55 mph shown
54.2 mph actual
65 mph shown
64.0 mph actual
75 mph shown
73.9 mph actual
Common questions
- Will 275/65R20 fit instead of 285/65R20?
- Good fit. Within the 3% rule — overall diameter changes only 1.5%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read higher than your true speed. Overall diameter goes from 34.59″ to 34.07″, a change of −1.5%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 275/65R20?
- At an indicated 60 mph you would actually be travelling about 59.1 mph — a −1.5% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 285/65R20 and 275/65R20?
- 285/65R20 turns roughly 583 revolutions per mile; 275/65R20 turns roughly 592. That is a change of +9 revolutions per mile, which is what shifts odometer and speedometer readings.