225/75R16 vs 255/70R16
New overall diameter
30.06″
was 29.29″
True speed at an indicated 60
61.6 mph
speedometer reads low
Revolutions per mile
671
was 689 · −18
Switching from 225/75R16 to 255/70R16? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 225/75R16 | 255/70R16 | Change |
|---|---|---|---|
| Overall diameter | 29.29″ | 30.06″ | +0.77″ (+2.6%) |
| Sidewall height | 6.64″ (168.8 mm) | 7.03″ (178.5 mm) | +9.8 mm |
| Tread width | 225 mm | 255 mm | +30 mm |
| Circumference | 92.01″ | 94.42″ | +2.41″ |
| Revs per mile | 689 | 671 | −18 |
| Speedometer error | baseline | +2.6% | reads low |
Diameter overlay
225/75R16 255/70R16
Speedometer check
With 255/70R16 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
25.7 mph actual
35 mph shown
35.9 mph actual
45 mph shown
46.2 mph actual
55 mph shown
56.4 mph actual
65 mph shown
66.7 mph actual
75 mph shown
77.0 mph actual
Common questions
- Will 255/70R16 fit instead of 225/75R16?
- Good fit. Within the 3% rule — overall diameter changes only 2.6%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read lower than your true speed. Overall diameter goes from 29.29″ to 30.06″, a change of +2.6%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 255/70R16?
- At an indicated 60 mph you would actually be travelling about 61.6 mph — a +2.6% error. The speedometer reads low, so you are going faster than it shows.
- What is the difference in revolutions per mile between 225/75R16 and 255/70R16?
- 225/75R16 turns roughly 689 revolutions per mile; 255/70R16 turns roughly 671. That is a change of −18 revolutions per mile, which is what shifts odometer and speedometer readings.