245/35R19 vs 255/40R19
New overall diameter
27.03″
was 25.75″
True speed at an indicated 60
63.0 mph
speedometer reads low
Revolutions per mile
746
was 783 · −37
Switching from 245/35R19 to 255/40R19? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 245/35R19 | 255/40R19 | Change |
|---|---|---|---|
| Overall diameter | 25.75″ | 27.03″ | +1.28″ (+5.0%) |
| Sidewall height | 3.38″ (85.8 mm) | 4.02″ (102.0 mm) | +16.3 mm |
| Tread width | 245 mm | 255 mm | +10 mm |
| Circumference | 80.90″ | 84.92″ | +4.02″ |
| Revs per mile | 783 | 746 | −37 |
| Speedometer error | baseline | +5.0% | reads low |
Diameter overlay
245/35R19 255/40R19
Speedometer check
With 255/40R19 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
26.2 mph actual
35 mph shown
36.7 mph actual
45 mph shown
47.2 mph actual
55 mph shown
57.7 mph actual
65 mph shown
68.2 mph actual
75 mph shown
78.7 mph actual
Common questions
- Will 255/40R19 fit instead of 245/35R19?
- Marginal fit — proceed with care. The 5.0% diameter change is between 3% and 5%. It can work, but expect noticeable speedometer error and check wheel-well clearance, scrub radius and gearing before committing. Your speedometer will read lower than your true speed. Overall diameter goes from 25.75″ to 27.03″, a change of +5.0%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 255/40R19?
- At an indicated 60 mph you would actually be travelling about 63.0 mph — a +5.0% error. The speedometer reads low, so you are going faster than it shows.
- What is the difference in revolutions per mile between 245/35R19 and 255/40R19?
- 245/35R19 turns roughly 783 revolutions per mile; 255/40R19 turns roughly 746. That is a change of −37 revolutions per mile, which is what shifts odometer and speedometer readings.