245/75R16 vs 225/75R16
New overall diameter
29.29″
was 30.47″
True speed at an indicated 60
57.7 mph
speedometer reads high
Revolutions per mile
689
was 662 · +27
Switching from 245/75R16 to 225/75R16? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 245/75R16 | 225/75R16 | Change |
|---|---|---|---|
| Overall diameter | 30.47″ | 29.29″ | −1.18″ (−3.9%) |
| Sidewall height | 7.23″ (183.8 mm) | 6.64″ (168.8 mm) | −15.0 mm |
| Tread width | 245 mm | 225 mm | −20 mm |
| Circumference | 95.72″ | 92.01″ | −3.71″ |
| Revs per mile | 662 | 689 | +27 |
| Speedometer error | baseline | −3.9% | reads high |
Diameter overlay
245/75R16 225/75R16
Speedometer check
With 225/75R16 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
24.0 mph actual
35 mph shown
33.6 mph actual
45 mph shown
43.3 mph actual
55 mph shown
52.9 mph actual
65 mph shown
62.5 mph actual
75 mph shown
72.1 mph actual
Common questions
- Will 225/75R16 fit instead of 245/75R16?
- Marginal fit — proceed with care. The 3.9% diameter change is between 3% and 5%. It can work, but expect noticeable speedometer error and check wheel-well clearance, scrub radius and gearing before committing. Your speedometer will read higher than your true speed. Overall diameter goes from 30.47″ to 29.29″, a change of −3.9%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 225/75R16?
- At an indicated 60 mph you would actually be travelling about 57.7 mph — a −3.9% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 245/75R16 and 225/75R16?
- 245/75R16 turns roughly 662 revolutions per mile; 225/75R16 turns roughly 689. That is a change of +27 revolutions per mile, which is what shifts odometer and speedometer readings.