245/75R16 vs 265/75R16
New overall diameter
31.65″
was 30.47″
True speed at an indicated 60
62.3 mph
speedometer reads low
Revolutions per mile
637
was 662 · −25
Switching from 245/75R16 to 265/75R16? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 245/75R16 | 265/75R16 | Change |
|---|---|---|---|
| Overall diameter | 30.47″ | 31.65″ | +1.18″ (+3.9%) |
| Sidewall height | 7.23″ (183.8 mm) | 7.82″ (198.8 mm) | +15.0 mm |
| Tread width | 245 mm | 265 mm | +20 mm |
| Circumference | 95.72″ | 99.43″ | +3.71″ |
| Revs per mile | 662 | 637 | −25 |
| Speedometer error | baseline | +3.9% | reads low |
Diameter overlay
245/75R16 265/75R16
Speedometer check
With 265/75R16 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
26.0 mph actual
35 mph shown
36.4 mph actual
45 mph shown
46.7 mph actual
55 mph shown
57.1 mph actual
65 mph shown
67.5 mph actual
75 mph shown
77.9 mph actual
Common questions
- Will 265/75R16 fit instead of 245/75R16?
- Marginal fit — proceed with care. The 3.9% diameter change is between 3% and 5%. It can work, but expect noticeable speedometer error and check wheel-well clearance, scrub radius and gearing before committing. Your speedometer will read lower than your true speed. Overall diameter goes from 30.47″ to 31.65″, a change of +3.9%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 265/75R16?
- At an indicated 60 mph you would actually be travelling about 62.3 mph — a +3.9% error. The speedometer reads low, so you are going faster than it shows.
- What is the difference in revolutions per mile between 245/75R16 and 265/75R16?
- 245/75R16 turns roughly 662 revolutions per mile; 265/75R16 turns roughly 637. That is a change of −25 revolutions per mile, which is what shifts odometer and speedometer readings.