275/60R20 vs 295/60R20
New overall diameter
33.94″
was 32.99″
True speed at an indicated 60
61.7 mph
speedometer reads low
Revolutions per mile
594
was 611 · −17
Switching from 275/60R20 to 295/60R20? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 275/60R20 | 295/60R20 | Change |
|---|---|---|---|
| Overall diameter | 32.99″ | 33.94″ | +0.94″ (+2.9%) |
| Sidewall height | 6.50″ (165.0 mm) | 6.97″ (177.0 mm) | +12.0 mm |
| Tread width | 275 mm | 295 mm | +20 mm |
| Circumference | 103.65″ | 106.62″ | +2.97″ |
| Revs per mile | 611 | 594 | −17 |
| Speedometer error | baseline | +2.9% | reads low |
Diameter overlay
275/60R20 295/60R20
Speedometer check
With 295/60R20 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
25.7 mph actual
35 mph shown
36.0 mph actual
45 mph shown
46.3 mph actual
55 mph shown
56.6 mph actual
65 mph shown
66.9 mph actual
75 mph shown
77.1 mph actual
Common questions
- Will 295/60R20 fit instead of 275/60R20?
- Good fit. Within the 3% rule — overall diameter changes only 2.9%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read lower than your true speed. Overall diameter goes from 32.99″ to 33.94″, a change of +2.9%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 295/60R20?
- At an indicated 60 mph you would actually be travelling about 61.7 mph — a +2.9% error. The speedometer reads low, so you are going faster than it shows.
- What is the difference in revolutions per mile between 275/60R20 and 295/60R20?
- 275/60R20 turns roughly 611 revolutions per mile; 295/60R20 turns roughly 594. That is a change of −17 revolutions per mile, which is what shifts odometer and speedometer readings.