275/60R20 vs 275/55R20
New overall diameter
31.91″
was 32.99″
True speed at an indicated 60
58.0 mph
speedometer reads high
Revolutions per mile
632
was 611 · +21
Switching from 275/60R20 to 275/55R20? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 275/60R20 | 275/55R20 | Change |
|---|---|---|---|
| Overall diameter | 32.99″ | 31.91″ | −1.08″ (−3.3%) |
| Sidewall height | 6.50″ (165.0 mm) | 5.95″ (151.3 mm) | −13.8 mm |
| Tread width | 275 mm | 275 mm | +0 mm |
| Circumference | 103.65″ | 100.25″ | −3.40″ |
| Revs per mile | 611 | 632 | +21 |
| Speedometer error | baseline | −3.3% | reads high |
Diameter overlay
275/60R20 275/55R20
Speedometer check
With 275/55R20 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
24.2 mph actual
35 mph shown
33.9 mph actual
45 mph shown
43.5 mph actual
55 mph shown
53.2 mph actual
65 mph shown
62.9 mph actual
75 mph shown
72.5 mph actual
Common questions
- Will 275/55R20 fit instead of 275/60R20?
- Marginal fit — proceed with care. The 3.3% diameter change is between 3% and 5%. It can work, but expect noticeable speedometer error and check wheel-well clearance, scrub radius and gearing before committing. Your speedometer will read higher than your true speed. Overall diameter goes from 32.99″ to 31.91″, a change of −3.3%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 275/55R20?
- At an indicated 60 mph you would actually be travelling about 58.0 mph — a −3.3% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 275/60R20 and 275/55R20?
- 275/60R20 turns roughly 611 revolutions per mile; 275/55R20 turns roughly 632. That is a change of +21 revolutions per mile, which is what shifts odometer and speedometer readings.