TireSizeCheck

285/70R18 vs 275/70R18

Fit verdict

Good fit

Diameter change

−1.6%

Within the 3% rule — overall diameter changes only 1.6%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read higher than your true speed.

New overall diameter

33.16″

was 33.71″

True speed at an indicated 60

59.0 mph

speedometer reads high

Revolutions per mile

608

was 598 · +10

Switching from 285/70R18 to 275/70R18? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.

Measurement 285/70R18 275/70R18 Change
Overall diameter 33.71″ 33.16″ −0.55″ (−1.6%)
Sidewall height 7.85″ (199.5 mm) 7.58″ (192.5 mm) −7.0 mm
Tread width 285 mm 275 mm −10 mm
Circumference 105.90″ 104.17″ −1.73″
Revs per mile 598 608 +10
Speedometer error baseline −1.6% reads high

Diameter overlay

285/70R18 275/70R18

Speedometer check

With 275/70R18 fitted, when the speedometer shows the indicated speed, your actual speed is:

25 mph shown

24.6 mph actual

35 mph shown

34.4 mph actual

45 mph shown

44.3 mph actual

55 mph shown

54.1 mph actual

65 mph shown

63.9 mph actual

75 mph shown

73.8 mph actual

Common questions

Will 275/70R18 fit instead of 285/70R18?
Good fit. Within the 3% rule — overall diameter changes only 1.6%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read higher than your true speed. Overall diameter goes from 33.71″ to 33.16″, a change of −1.6%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
How far off will my speedometer read on 275/70R18?
At an indicated 60 mph you would actually be travelling about 59.0 mph — a −1.6% error. The speedometer reads high, so you are going slower than it shows.
What is the difference in revolutions per mile between 285/70R18 and 275/70R18?
285/70R18 turns roughly 598 revolutions per mile; 275/70R18 turns roughly 608. That is a change of +10 revolutions per mile, which is what shifts odometer and speedometer readings.