285/70R18 vs 295/70R18
New overall diameter
34.26″
was 33.71″
True speed at an indicated 60
61.0 mph
speedometer reads low
Revolutions per mile
589
was 598 · −10
Switching from 285/70R18 to 295/70R18? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 285/70R18 | 295/70R18 | Change |
|---|---|---|---|
| Overall diameter | 33.71″ | 34.26″ | +0.55″ (+1.6%) |
| Sidewall height | 7.85″ (199.5 mm) | 8.13″ (206.5 mm) | +7.0 mm |
| Tread width | 285 mm | 295 mm | +10 mm |
| Circumference | 105.90″ | 107.63″ | +1.73″ |
| Revs per mile | 598 | 589 | −10 |
| Speedometer error | baseline | +1.6% | reads low |
Diameter overlay
285/70R18 295/70R18
Speedometer check
With 295/70R18 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
25.4 mph actual
35 mph shown
35.6 mph actual
45 mph shown
45.7 mph actual
55 mph shown
55.9 mph actual
65 mph shown
66.1 mph actual
75 mph shown
76.2 mph actual
Common questions
- Will 295/70R18 fit instead of 285/70R18?
- Good fit. Within the 3% rule — overall diameter changes only 1.6%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read lower than your true speed. Overall diameter goes from 33.71″ to 34.26″, a change of +1.6%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 295/70R18?
- At an indicated 60 mph you would actually be travelling about 61.0 mph — a +1.6% error. The speedometer reads low, so you are going faster than it shows.
- What is the difference in revolutions per mile between 285/70R18 and 295/70R18?
- 285/70R18 turns roughly 598 revolutions per mile; 295/70R18 turns roughly 589. That is a change of −10 revolutions per mile, which is what shifts odometer and speedometer readings.