295/35R20 vs 255/45R19
New overall diameter
28.04″
was 28.13″
True speed at an indicated 60
59.8 mph
speedometer reads high
Revolutions per mile
719
was 717 · +2
Switching from 295/35R20 to 255/45R19? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 295/35R20 | 255/45R19 | Change |
|---|---|---|---|
| Overall diameter | 28.13″ | 28.04″ | −0.09″ (−0.3%) |
| Sidewall height | 4.06″ (103.3 mm) | 4.52″ (114.8 mm) | +11.5 mm |
| Tread width | 295 mm | 255 mm | −40 mm |
| Circumference | 88.37″ | 88.08″ | −0.30″ |
| Revs per mile | 717 | 719 | +2 |
| Speedometer error | baseline | −0.3% | reads high |
Diameter overlay
295/35R20 255/45R19
Speedometer check
With 255/45R19 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
24.9 mph actual
35 mph shown
34.9 mph actual
45 mph shown
44.8 mph actual
55 mph shown
54.8 mph actual
65 mph shown
64.8 mph actual
75 mph shown
74.7 mph actual
Common questions
- Will 255/45R19 fit instead of 295/35R20?
- Good fit. Within the 3% rule — overall diameter changes only 0.3%. Speedometer calibration, ABS, traction control and gearing all stay in their intended range. Your speedometer will read higher than your true speed. Overall diameter goes from 28.13″ to 28.04″, a change of −0.3%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 255/45R19?
- At an indicated 60 mph you would actually be travelling about 59.8 mph — a −0.3% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 295/35R20 and 255/45R19?
- 295/35R20 turns roughly 717 revolutions per mile; 255/45R19 turns roughly 719. That is a change of +2 revolutions per mile, which is what shifts odometer and speedometer readings.