255/45R19 vs 255/40R19
New overall diameter
27.03″
was 28.04″
True speed at an indicated 60
57.9 mph
speedometer reads high
Revolutions per mile
746
was 719 · +27
Switching from 255/45R19 to 255/40R19? Everything that changes is below — sidewall, tread width, circumference, revolutions per mile and speedometer error at road speeds.
| Measurement | 255/45R19 | 255/40R19 | Change |
|---|---|---|---|
| Overall diameter | 28.04″ | 27.03″ | −1.00″ (−3.6%) |
| Sidewall height | 4.52″ (114.8 mm) | 4.02″ (102.0 mm) | −12.8 mm |
| Tread width | 255 mm | 255 mm | +0 mm |
| Circumference | 88.08″ | 84.92″ | −3.15″ |
| Revs per mile | 719 | 746 | +27 |
| Speedometer error | baseline | −3.6% | reads high |
Diameter overlay
255/45R19 255/40R19
Speedometer check
With 255/40R19 fitted, when the speedometer shows the indicated speed, your actual speed is:
25 mph shown
24.1 mph actual
35 mph shown
33.7 mph actual
45 mph shown
43.4 mph actual
55 mph shown
53.0 mph actual
65 mph shown
62.7 mph actual
75 mph shown
72.3 mph actual
Common questions
- Will 255/40R19 fit instead of 255/45R19?
- Marginal fit — proceed with care. The 3.6% diameter change is between 3% and 5%. It can work, but expect noticeable speedometer error and check wheel-well clearance, scrub radius and gearing before committing. Your speedometer will read higher than your true speed. Overall diameter goes from 28.04″ to 27.03″, a change of −3.6%. As a rule of thumb, under 3% is safe, 3–5% needs a clearance check, and over 5% is not recommended.
- How far off will my speedometer read on 255/40R19?
- At an indicated 60 mph you would actually be travelling about 57.9 mph — a −3.6% error. The speedometer reads high, so you are going slower than it shows.
- What is the difference in revolutions per mile between 255/45R19 and 255/40R19?
- 255/45R19 turns roughly 719 revolutions per mile; 255/40R19 turns roughly 746. That is a change of +27 revolutions per mile, which is what shifts odometer and speedometer readings.